BGMST - NO BOND 1001 LUBRICANT
- MSDS: BGMST
- Manufacturer: BULK CHEMICAL DIV MALTER INTERNATIONAL
- Product Name: NO BOND 1001 LUBRICANT
- National Stock Number: 6850-00D002845
Product Identification
Product ID:NO BOND 1001 LUBRICANT
MSDS Date:01/01/1987
FSC:6850
NIIN:00D002845
MSDS Number: BGMST
Responsible Party
GRETNA, LA 70053
US
Emergency Phone: 504-362-3232
Cage: EO174
Contractor
Telephone: 504-362-3232 DISCONNECTED(2-20-92)
Cage: 56921
Ingredients
1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE (FREON 113) (SARA
CAS: 76-13-1
RTECS: KJ4000000
Fraction By Weight: 35%
OSHA PEL 1000PPM/1250STEL
ACGIH TLV: 1000PPM/1250STEL9192
PROPELLANT(K12)
Fraction By Weight: 60%
SILICONE SF96
Fraction By Weight: 1%
Hazards
Effects of Overexposure:INHALATION MAY BE HARMFUL.EYES/SKIN-IRRITATS.
First Aid
First Aid:SKIN:WASH W.SOAP & H*2O. EYES:FLUSH W. H*2O. INGESTED:DON'T
INDUCE VOMITING. INHALED:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NEED. KEEP WARM & QUIET. REMOVE CONTAMINATED CLOTHING. NEVER GIVE
ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.
Fire Fighting
Flash Point:NONE
Extinguishing Media:EXTINQUISH W. AGENT SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:NON-FLAMMABLE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:DISPOSE OF LEAKING CANS BY TURNING UPSIDE DOWN
AND PRESSING VALVE TO RELEASE ALL OF PROPELLANT GAS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 110F.DO NOT
PUNCTURE CAN/STORE IN DIRECT SUNLIGHT.CRUSH EMPTY CANS.
Other Precautions:KEEP OUT OF THE REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE
Supplemental Safety and Health
MATERIAL MEETS REQUIREMENT FOR TYPE IV UNDER MIL-C-83360.
Chemical Properties
HCC:V2
Vapor Density:1.0
Spec Gravity:1.418
Evaporation Rate & Reference:1(LUB ONLY,BUOH=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:MILD ODOR,COLORLESS LIQUID IN AEROSAL.
Percent Volatiles by Volume:85
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE NOTED,BUT EXPECT CO, CO*2, H*2O.
Disposal
Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE CONTAINER.CRUSH
AND BURY EMPTY CONTAINER IN APPROVED LANDFILL IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.